Способы оплаты.
Оплата по безналичному расчету производиться в кассе любого банка или с расчетного счета Вашей фирмы.Способы доставки:
1. Доставка в отделения Национальных компаний-перевозчиков по всей Украине национальными компаниями-перевозчиками Новая Почта, Delivery.More:
Используя сервис компаний-перевозчиков, Вы можете получить товар даже в самых отдаленных уголках Украины. В среднем, доставка занимает 2-3 дня, во время заказа наши менеджеры согласуют с Вами дату доставки перед отправкой товара. Стоимость доставки товаров рассчитывается индивидуально исходя из обьема заказа и места доставки. 2. Самовывоз из складов пердставительств Альта-Профиль в городах: Бровары, Сумы, Тернополь, Львов, Одесса, Харьков, Винница,More:
Самовывоз возможен с понедельника по пятницу с 9.00 до 18.00, после согласования заказа с менеджером. Оплата: безналичная. Кроме того, в представительствах Альта-Профиль Вы можете наглядно ознакомиться с продукцией и получить дополнительную консультацию по подбору и монтажу водосточных систем. 3. Самовывоз либо специальные условия доставки от наших ДИЛЛЕРОВ в регионах
DESCRIPTION:
Section fence concave form, height - 105 cm
SECTION SIZE WITHOUT PILLARS:
105х172,5х5 cm
SECTION SIZE WITH ONE PILLAR:
105х183х5 cm
PRICE: 2095,60 grn/sec
EASY TO MOUNT
Because fence is sold in the form of finished sections, process of mounting of decorative plastic fencing will take a minimum of time.
ENDURANCE 25 YEARS OF OPERATION
Because PVC fence does not decay, rust, does not swell with moisture and does not crack, it will serve you for up to 30 years without losing its looks.
EASY MAINTENANCE
In contrast to wooden fence, plastic fence needs no painting. It's enough to wash it with power water, and it will look like brand new even many years after.
VANDALISM PROOF EASY TO CLEAN
The Alta Fence decorative plastic fence for flowerbeds and lawns is almost impossible to break, and any graffiti can be easily washed off with detergent.
MODERN, EUROPEAN LOOK
The modern design solution of the fence will contribute into a contemporary European style of your yard
Elements of the fence section:
1. Top beam (172.5 cm) - 1 unit;
2. Bottom beam (172.5 cm) - 1 unit;
3. Boards:
4. Board plug - 11 units;
5. Mounting brace - 4 units;
6. Screws - 25 units
7. Brace plug
Extra accessories:
For installation and decoration of the fence section, it is possible to separately buy:
- long pillar (main) 167.5 cm
- surface pillar 110 cm
- flat pillar plug
- "Gothic" pillar plug
- aluminum pillar insert
- decorative pillar element
- metal round bearing heel
- bolt lock for the gate
- canopy for the wicket
- bolt lock for the wicket
- board plug
- solar-powered lamp for pillars
- wicket
Flat plug for the pillar, h-3 cm
Closes top hole in pole. Prevents ingress of foreign elements into structure.
Gothic plug for the pillar, h-21 cm
Original post hole plug
Decorative pillar element
Hides the lower part of the mount
Decorative pillar element, folding
Hides the lower part of the mount
Pillar 168 cm
For digging in the ground, with the following collections: FAZENDA, LATTICE, VILLA
Pillar 110 cm
For mounting on the surface, with the following collections: FAZENDA, LATTICE, VILLA
Pillar 68.58 cm
For mounting on the surface, with the GARDEN collection
Aluminum insert
Increases pillar strength, mandatory elements when fitting a wicket
Aluminum mounting base
for the pillar
Solar plug for the pillar
Solar-powered lamp
Brace for board fastening
included into the section set
Plug stools
included into the section set
Wicket gate GARDEN
Wicket gate FAZENDA
Wicket gate LATTICE
Wicket gate VILLA
Bolt lock
White metal
Canopies
White metal
Gate bolt
White metal
1 – Pillar for mounting gate. High 167,5 cm
2 – Line pillar. High 167,5 cm
3 - Corner pillar. High 167,5 cm
4 - End pillar. High 167,5 cm
5 - Pillar axis
6 - Bracket attachment points
7 - Aluminium insert. High 167,5 cm
8 - Canopies
9 - Bolt lock
1. Dig holes for pillars, 25 cm of the diameter and 55 cm deep, with tilted walls.
2. Place 167.5 cm long end pillars into the holes, center them, and rotate them in the holes.
3. Check vertical installation with a level. The pillar’s height above the ground level should be
110 cm.
4. Pour concrete into the hole around the pillar, so that there were approximately 5 cm to the
ground level. Once the concrete hardens completely, fill the remaining holes with soil.
5. Place the linear (intermediate) pillars in the holes and center them as described in step 2.
6. Fill corner and end pillars with concrete by half. Tap sides of the pillar lightly to compact the
concrete.
7. Into end pillars, on which the wicket or gate will be mounted, it is necessary to insert 167.5
cm long aluminum inserts. You don’t need to fill them with concrete.
8. Put the caps on the pillars having smeared them with glue for plastic
1 – Pillar for mounting gate. High 110 cm
2 –Line pillar. High 110 cm
3-Corner pillar. High 110 cm
4-End pillar. High 110 cm
5-Pillar axis
6- Bracket attachment points
7- Aluminium mounting base. High 69 cm
8- Aluminium mounting base. High 110 cm
1. Using metalware, mount the 69 cm long aluminum base on solid surface.
2. Put 110 cm long pillars on the metal base.
3. To mount end pillars, on which the wicket or gate will be mounted, you need to use a 110 cm
long aluminum mounting base.
4. If necessary, put a decorative pillar element on the pillar.
5. Put the caps on the pillars having smeared them with glue for plastic.
1. Put 110 cm long pillars on the round metal toe.
2. Put the caps on the pillars having smeared them with glue.
For this type of installation, it is necessary that the distance between the existing columns is
equal to the section length + 1 cm allowance for expansion / compression.
1. Mark on the pillars the place for fixing the sections (joist).
2. Put braces on edges of the sections (joists).
Note! Please, note that there should be a gap of 0.5 cm between the edge of the section and the
edge of the bracket on the pillar side to level expansion / compression process. Such gaps
should be left on the both sides of a section.
3. Screw braces to the pillars using stainless metalware.
4. Secure braces on the sections with stainless metalware.
5. Close all metalware tops with special plugs.
6. Prepare joints. To do this, insert joint plugs covered with glue for plastic (polyvinyl chloride)
into the joints.
7. Insert the joints into section holes according to their lengths (for concave design fences).
1. Attach balancing units reinforced with an aluminum insert of pillars to the fence wicket.
2. To mount the gate, use two wickets.
3. A bolt latch can be attached additionally to the wicket and the pillar.
Lawn edge - is a plastic fencing. It is widely used in suburban areas for decorating and convenience of dividing the landing rows.
